Clauss 9'' ExtremEdge Ti Bent Shear

Country origin China

The Handles are made of plastic molded over the scissor.

The estimation is 180 degrees +-1degree

Hi, This knife should be ground on both sides. Thanks!

Hi, Our 4329 model has a few variations: 18160: 9" Ultraflex Bent Shear, Adjustable 18170: 9" Ultraflex Bent Shear, Curved Blades, Adjustable 18330: 9" Bent Shear, Adjustable 18400: 9" Bent Shear, Adjustable

Hello Sean, This item has been discontinued and we no longer are retaining this information. Our apologies. Acme United

Hello Sheila, The 18966 is discontinued and the replacement blades for this item are no longer available. Our apologies.

Hi Janice, The screw in the middle of the scissors might be loose. You might also have used it to cut very thick items that the scissors are made to withstand. Thanks!

Hi, Thank you for taking the time to write to us. We apologize for any inconvenience. If you would like warranty replacement please email [email protected] Thank You Demaya

It is safe to use WD-40 on this item

https://youtu.be/DDYSaCtAxFE

Hi, If you're referring to the spring that is in the middle of other pruners, then no, this does not have that. Thank you!

Hi, This item is made in China. It is capable of removing UPVC beading around a window. Thank you.

Utility knife blades that have hooks on the ends are used for cutting very thick and heavy-duty materials. You can normally find these blades on the knives of roofers for trimming the edge off of shingles. Other ways that hook blades are utilized are for cutting carpet and linoleum.

Hi, Unfortunately, we do not provide part replacements for Clauss products. We do, however, offer warranty replacements. Please send us your item, as well as a copy of this message to the address below: Acme United Corporation ATTN: Clauss Warranty 1 Waterview Dr Shelton, CT 06484 If you could also include inside the package your name, number, and the return address (we cannot ship to P.O. Boxes), that will help us to accurately track your claim. There may be longer than usual processing times for warranty claims temporarily, but we will be sure to send you a brand new replacement item as soon as we can. We greatly appreciate your patience & understanding during this time. Thank you! Best, Don

The updated part number is 11560

If your Clauss product fails to perform due to defects in materials or workmanship, we will replace it regardless of age. Normal wear, sharpening, industrial use or abuse, misuse or neglect is not covered. Defective products will be repaired, replaced or substituted with the same product or one of equal value.

In the supplied pictures above it clearly shows two bevels. One on each side. This makes it a double bevel tool. 

Unfortunately, these are not available as a true left handed scissor. We will make note of the interest for future product development.

These can be sharpened using any knife or scissor sharpener. We recommend the DMT brand.

Please see our helpdesk article below: https://acmeunitedcorporation.zendesk.com/hc/en-us/articles/227883887-How-do-I-replace-the-blade-on-the-Westcott-Titanium-Bonded-Rotary-Cutter-16370-

Clauss 330 scissors are no longer manufactured

Unfortunately, we do not sell or provide the screws separately at all. If there is a break or issue with your product, I would advise sending us pictures at [email protected].

Unfortunately, this item does not come in a left handed version.

We do not sell a belt sheath for these shears

Please reach out to [email protected] for info on the warranty process.

Item 19563 is a garden snip and item 18053 is an all purpose snip

Replacement blades are available in packs of 10, item #18036.

Yes we use them for floral wire

All of our shears are designed to be sharpened when dull- for example a knife & scissor sharpener can be used to sharpen the blades. Another option is to use a local sharpening service for blades.